If your line of work requires the use of metric fasteners, you are going to want to make sure that you are taking a little bit of time to review the following tips. This way, you will not have any problems with their use and this will make your job a lot easier. It can also ensure that the systems that those fasteners are used in will not experience issues because of failing fasteners. Here are a few tips to get you started.
Make Use Of Fastener Lubricant
Many people will make the mistake of skipping out on the use of fastener lubricant, especially on stainless steel fasteners. The reason might be due to the fact that these fasteners have a protective coating on them that is meant to help reduce the likelihood of oxidation. The thing is though, when fasteners start to rub together, it creates friction. That friction happens during the installation of the fasteners. The heat created by the friction can cause the fasteners to not only become jammed, but they can actually become welded together.
Use The Correct Screwdriver
Some people will simply grab any Phillips screwdriver and work with that. The problem with this is that not all screwdrivers are the same size. You really need to make sure that you are working with a screwdriver that properly fits the fasteners. If you do not do this, you could end up with a lot of fasteners with stripped heads. Put your screwdriver into the drive recess. If there is any wiggle room, you need to get a larger screwdriver.
Never Over Tighten The Fasteners
While you might want the fasteners to be nice and tight, you do not want them to be too tight. To help make sure that this does not happen, you could always use a torch wrench. With the torch wrench, there is the ability to set it to where it will simply slip off some the appropriate amount of force is reached.
After taking the previously mentioned tips into consideration, you will find that you will have a much easier time with the fasteners. If there are a lot of people that make use of the fasteners in your business, you should think about offering this advice to them so they will benefit too. You could even create a little sign or list of tips in order to keep everyone on the same page.
Share